Hi All, We have SCOM 2007R2 in our environment. Currently the server & action account used to discover is under "Corp" domain. It has admin access for all the domain. Currently iam able to discover only the server under CORP domain. Apart from CORP domain iam unable to discover. Iam used the account which has administrative access. Kindly help me. Regards, Sandoss Kumar N

Hi, make sure that your Run as account it's associated to eache domain controller,and to do this follow the following steps: Administration-->Security-->Run as profile and double click in "AD MP Account" and then associate the account to each domain controller Best regards.Oussama Oueslati | System Engineer | vNext Consulting

Hi Oussama, I double clicked the "AD MP Account" and it aksed to select Run as account information. I selected "Data Warehouse Action Account". The account has Admin Privileges. I am not sure how to associate the account to each domain. Kindly advice. Regards, Sandoss Kumar N

Hi, I think this link can help you it contain the detailed steps: http://r0nwilliams.wordpress.com/2008/07/31/monitoring-multiple-domains-with-operations-manager-2007/ Oussama Oueslati | System Engineer | vNext Consulting

HI, I am using SCOM 2007r2, the screenshot refers to SCOM 2007. I am able to view only device which i have added already in SCOM console. apart from that i am unable to view any other servers list.

Hi, I am facing issues while discovering different domain servers in SCOM 2007R2. Kindly advice me.

is there a two way trust between the domains? have you considered using a gateway on the remote domain?Scott Moss MVP (Operations Manager) | President - System Center Virtual Users Group | Vice President - Atlanta Southeast Management Users Group (ATL SMUG) Please remember to click Mark as Answer on the post that helps you!

HI Scott, There is no Gateway server in my environment only RMS, MS,Report manager, Operation Databse & Operation DW. The Server i trying to discover is child of Corp domain. Issue: My SCOM server is in CORP domain, iam able to add the agent through automatic discovery for all corp domain without any issues. But iam unable to add the servers other than CORP domain. Now iam Trying to add some of the child domain of CORP Domain. Eg: MY SCOM server FQDN name is "SSSSSSS.corp.XXX.com" now iam trying to add the server FQDN name is "AAAAAAA.au.corp.XXX.com". The second server is child domain of CORP domain. KInldy help me in this issue. Regards, Sandoss Kumar N

Hi, If the computers you want to discover are in another domain without gateway server, you need to ensure the domain and the domain which the RMS locates are fullly trusted: Use the Discovery Wizard to Deploy Agents http://technet.microsoft.com/en-us/library/cc950509.aspx Meanwhile, please ensure the communications via the required posts are not blocked: Agent discovery and push troubleshooting in OpsMgr 2007 http://blogs.technet.com/b/kevinholman/archive/2007/12/12/agent-discovery-and-push-troubleshooting-in-opsmgr-2007.aspx Hope this helps. Thanks. Nicholas Li - MSFT Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Perhaps you can post the error that you receive when you try to discover the agents. Does discovery work, but is pushing the agent the problem? Are all firewalls open for pushing the agent?Regards, Marc Klaver http://jama00.wordpress.com/

HI, Iam trying to discover using Advanced options. Once i enter the server name and action account information then i clicked discver button. after that iam getting a below error. Note: The ID i used to discover having Admin privileges, port are open and that particular server is under Active directory list. Kinldy help me.

Hi, take a look at this link it can help you to resolve this issue : http://thoughtsonopsmgr.blogspot.com/2009/09/opsmgr-r2-discovery-issue.html and try to manually enter the FQDN of the child domain in the wizard "computer an device management wizard" during the discovery methodOussama Oueslati | System Engineer | vNext Consulting

Hi, take a look at this link it can help you to resolve this issue : http://thoughtsonopsmgr.blogspot.com/2009/09/opsmgr-r2-discovery-issue.html and try to manually enter the FQDN of the child domain in the wizard "computer an device management wizard" during the discovery methodOussama Oueslati | System Engineer | vNext Consulting

Hi, take a look at this link it can help you to resolve this issue : http://thoughtsonopsmgr.blogspot.com/2009/09/opsmgr-r2-discovery-issue.html and try to manually enter the FQDN of the child domain in the wizard "computer an device management wizard" during the discovery methodOussama Oueslati | System Engineer | vNext Consulting

Hi Oussama, First i unchecked the option then i received the above screenshot error. As per your advice i checked and discovered. the discovery says successful but that agent remains in the pending management and says "Installation in progress" for amn one day. Kindly advice. Regards, Sandoss Kumar N

Hi Oussama, First i unchecked the option then i received the above screenshot error. As per your advice i checked and discovered. the discovery says successful but that agent remains in the pending management and says "Installation in progress" for amn one day. Kindly advice. Regards, Sandoss Kumar N

Hi Oussama, First i unchecked the option then i received the above screenshot error. As per your advice i checked and discovered. the discovery says successful but that agent remains in the pending management and says "Installation in progress" for amn one day. Kindly advice. Regards, Sandoss Kumar N

Hi, if you can check the client installation logs located at Ops Mgr RMS \programfiles\system center operations manager 2007\agent management \agent logs , and if you can try to manually install the SCOM agent from the command line and to do this take a look at this link : http://gbrulat.wordpress.com/2010/12/29/installer-lagent-scom-en-ligne-de-commande/Oussama Oueslati | System Engineer | vNext Consulting

Hi, if you can check the client installation logs located at Ops Mgr RMS \programfiles\system center operations manager 2007\agent management \agent logs , and if you can try to manually install the SCOM agent from the command line and to do this take a look at this link : http://gbrulat.wordpress.com/2010/12/29/installer-lagent-scom-en-ligne-de-commande/Oussama Oueslati | System Engineer | vNext Consulting

Hi, if you can check the client installation logs located at Ops Mgr RMS \programfiles\system center operations manager 2007\agent management \agent logs , and if you can try to manually install the SCOM agent from the command line and to do this take a look at this link : http://gbrulat.wordpress.com/2010/12/29/installer-lagent-scom-en-ligne-de-commande/Oussama Oueslati | System Engineer | vNext Consulting

Hi, if you can check the client installation logs located at Ops Mgr RMS \programfiles\system center operations manager 2007\agent management \agent logs , and if you can try to manually install the SCOM agent from the command line and to do this take a look at this link : http://gbrulat.wordpress.com/2010/12/29/installer-lagent-scom-en-ligne-de-commande/Oussama Oueslati | System Engineer | vNext Consulting

Hi, Please also try the following: 1. Check the issue referring to the methods below: OpsMgr 2007: Agents stuck in Pending Management with Event ID 21016 http://blogs.technet.com/b/smsandmom/archive/2008/03/13/opsmgr-2007-agents-stuck-in-pending-management-with-event-id-21016.aspx 2. Ensure the required ports have been allowed: How does Computer Discovery Work in OpsMgr 2007? http://blogs.technet.com/b/momteam/archive/2007/12/10/how-does-computer-discovery-work-in-opsmgr-2007.aspx Using a Firewall with Operations Manager 2007 http://technet.microsoft.com/en-us/library/cc540431(en-us).aspx If the issue persists, please check the Event Log on the management server and agents; if there are any related errors, please let us know the details. Hope this helps. Thanks. Nicholas Li - MSFT Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hi, Please also try the following: 1. Check the issue referring to the methods below: OpsMgr 2007: Agents stuck in Pending Management with Event ID 21016 http://blogs.technet.com/b/smsandmom/archive/2008/03/13/opsmgr-2007-agents-stuck-in-pending-management-with-event-id-21016.aspx 2. Ensure the required ports have been allowed: How does Computer Discovery Work in OpsMgr 2007? http://blogs.technet.com/b/momteam/archive/2007/12/10/how-does-computer-discovery-work-in-opsmgr-2007.aspx Using a Firewall with Operations Manager 2007 http://technet.microsoft.com/en-us/library/cc540431(en-us).aspx If the issue persists, please check the Event Log on the management server and agents; if there are any related errors, please let us know the details. Hope this helps. Thanks. Nicholas Li - MSFT Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hi, Please also try the following: 1. Check the issue referring to the methods below: OpsMgr 2007: Agents stuck in Pending Management with Event ID 21016 http://blogs.technet.com/b/smsandmom/archive/2008/03/13/opsmgr-2007-agents-stuck-in-pending-management-with-event-id-21016.aspx 2. Ensure the required ports have been allowed: How does Computer Discovery Work in OpsMgr 2007? http://blogs.technet.com/b/momteam/archive/2007/12/10/how-does-computer-discovery-work-in-opsmgr-2007.aspx Using a Firewall with Operations Manager 2007 http://technet.microsoft.com/en-us/library/cc540431(en-us).aspx If the issue persists, please check the Event Log on the management server and agents; if there are any related errors, please let us know the details. Hope this helps. Thanks. Nicholas Li - MSFT Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.