Windows 7 image 1-1 and 2-2
Hi,
When selecting our Windows 7 Professional imgae to deploy, I get the choice of 1-1 and 2-2? Can someone explain the exact difference between these images, I have a feeling it is something to do with bitlocker?
Thanks
Alistair
August 29th, 2012 5:56am
Hi Henk,
Thanks for the reply. So if we want to deploy the image with the 100MB partition and the main Windows partition which will be the c: drive, do we configure this within the task sequence? Configure 1st partition as 100MB and use image 1-1 and create
additional partition and use image 2-2?
Thanks
Alistair
Free Windows Admin Tool Kit Click here and download it now
August 29th, 2012 8:55am
Don't capture or deploy the 100MB partition -- there is no need to as this partition has no bearing on actual OS operation and will cause your entire WIM to be copied to the target system twice during the task sequence.Jason | http://blog.configmgrftw.com
August 29th, 2012 9:24am
Most of times I'm only deploy the partition used for the Windows 7 installation. So in this case select the second (2-2) partition in your task sequence. There's no need to keep the first partition actually. Just try it and have a look at the result.My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn
Free Windows Admin Tool Kit Click here and download it now
August 29th, 2012 9:27am
Thanks for the replies. I wantd the 100MB partition installed to allow for Bitlocker to be used in the future so I adjusted my task sequence:
Partitioned 2 volumes - 100MB boot partition and volume 2 using 100% of available disk space
Apply data image - Set volume 1 to apply image 1-1
Apply operating system - Deployed this to next available formatted partition and and applied image 2-2
This installed sucessfully with the required configuration
August 30th, 2012 8:06am
Beware of refreshes done on systems partitioned like this -- they will fail if you don't account for the partition. This is easy to work-around using a script (or MDT), but if you haven't done anything, a simple refresh TS on a system partitioned this
way will fail because it will use your 100 MB partition to initially try to download things and fail because 100MB is not nearly enough to download anything.Jason | http://blog.configmgrftw.com
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2012 9:40am
Jason,
Are you referring to a basic reinstall on a system that has the 100MB partition configured? We would likely just run the same TS or similar TS to partition the drive again before install.
Thanks
Alistair
August 30th, 2012 10:45am
Refresh scenarios in OSD do not reformat the drives because they preserve user data. If you are not going to do this and will always reformat/repartition the drive, then you won't ever have to account for this.Jason | http://blog.configmgrftw.com
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2012 10:48am