2015-04-21 12:00:21, Info [windeploy.exe] ------------------------------------------------
2015-04-21 12:00:21, Info [windeploy.exe] WinDeploy.exe launched with command-line []...
2015-04-21 12:00:21, Info [windeploy.exe] Setup has not completed, adding pending reboot.
2015-04-21 12:00:21, Info [windeploy.exe] Found generalization state [0x4], setup.exe completion flag [False] -->
launching setup.exe.
2015-04-21 12:00:21, Info [windeploy.exe] Launching [C:\Windows\system32\oobe\setup.exe]...
2015-04-21 12:02:30, Info [Shell Unattend] Running 'specialize' pass
2015-04-21 12:02:30, Info [Shell Unattend] ComputerName set to ************
2015-04-21 12:02:30, Info [Shell Unattend] Exiting 'specialize' pass with status 0x001f1000
2015-04-21 12:02:30, Info [SETUPUGC.EXE] SetupUGC launched with command line [specialize]
2015-04-21 12:02:30, Info [SETUPUGC.EXE] SetupUGC running to process unattend settings for pass [specialize]
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Processing any RunSynchronous setting...
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Running commands is not yet in progress
2015-04-21 12:02:30, Info [0x090008] PANTHR CBlackboard::Open: C:\Windows\panther\commandexec\CommandExec succeeded.
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Found run command in registry: description = [disable user account page]
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Found run command in registry: credentials = { domain is not specified,
username is not specified, password info not logged }
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Found run command in registry: will continue execution without examining
exit code
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Found run command in registry: path = [reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE
/v UnattendCreatedUser /t REG_DWORD /d 1 /f]
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Found RunSynchronous command: [reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE
/v UnattendCreatedUser /t REG_DWORD /d 1 /f]
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Finished executing [reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE
/v UnattendCreatedUser /t REG_DWORD /d 1 /f] synchronously
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Process returned with exit code 0x0
2015-04-21 12:02:30, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\commandexec\commandexec.
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Processing any RunAsynchronous setting...
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Running commands is not yet in progress
2015-04-21 12:02:30, Info [0x090008] PANTHR CBlackboard::Open: C:\Windows\panther\commandexec\CommandExec succeeded.
2015-04-21 12:02:30, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\commandexec\commandexec.
2015-04-21 12:02:30, Info [SETUPUGC.EXE] Processing ExtendOSPartition setting (if present)...
2015-04-21 12:02:30, Info [SETUPUGC.EXE] SetupUGC returning with exit code [0]
2015-04-21 12:02:30, Info [windeploy.exe] Process exited with exit code [0x0]
2015-04-21 12:02:30, Info [windeploy.exe] Found completion flag [True], reboot requested flag [True] --> rebooting
computer before proceeding with deployment...
2015-04-21 12:02:30, Info [windeploy.exe] Making sure that SystemSetupInProgress is cleared.
2015-04-21 12:02:30, Info [windeploy.exe] An immediate reboot or shutdown was requested/required... rebooting / shutting
down computer
2015-04-21 12:02:30, Info [windeploy.exe] Flushing registry to disk...
2015-04-21 12:02:30, Info [windeploy.exe] Flush took 31 ms.
2015-04-21 12:02:30, Info [windeploy.exe] WinDeploy.exe exiting with code [0x0]
2015-04-21 12:03:30, Info [windeploy.exe] ------------------------------------------------
2015-04-21 12:03:30, Info [windeploy.exe] WinDeploy.exe launched with command-line []...
2015-04-21 12:03:30, Info [windeploy.exe] Updating pass status for [specialize] to reflect reboot: 0x8 --> 0x9
2015-04-21 12:03:30, Info [windeploy.exe] Making sure that SystemSetupInProgress is cleared.
2015-04-21 12:03:30, Info [windeploy.exe] UnattendSearchExplicitPath: Found unattend file at [C:\Windows\Panther\Unattend\unattend.xml];
examining for applicability.
2015-04-21 12:03:30, Info [windeploy.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [oobeSystem]
at [C:\Windows\Panther\Unattend\unattend.xml].
2015-04-21 12:03:30, Info [windeploy.exe] UnattendSearchExplicitPath: Found unattend file at [C:\Windows\Panther\unattend.xml];
examining for applicability.
2015-04-21 12:03:30, Info [windeploy.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [oobeSystem]
at [C:\Windows\Panther\unattend.xml].
2015-04-21 12:03:30, Info [windeploy.exe] Found unattend file: [C:\Windows\Panther\Unattend\unattend.xml]
2015-04-21 12:03:30, Info [windeploy.exe] This is supposed to be an OOBE boot; checking for <Reseal> setting
override in unattend file [C:\Windows\Panther\Unattend\unattend.xml]...
2015-04-21 12:03:32, Info [windeploy.exe] Started WinSAT; will need to wait
2015-04-21 12:03:50, Info [windeploy.exe] Launching [C:\Windows\system32\oobe\oobeldr.exe /system]...
2015-04-21 12:03:50, Info [oobeldr.exe] OOBELdr.exe launched with command-line [/system]...
2015-04-21 12:03:50, Info [oobeldr.exe] OrchestrateUpdateImageState: Updating image state from [IMAGE_STATE_SPECIALIZE_RESEAL_TO_OOBE]
--> [IMAGE_STATE_UNDEPLOYABLE]
2015-04-21 12:03:50, Info [oobeldr.exe] Parsing command line arguments...
2015-04-21 12:03:50, Info [oobeldr.exe] Parsing the following command line: [/system]
2015-04-21 12:03:50, Info [oobeldr.exe] Status for unattend pass [oobeSystem] = 0x0
2015-04-21 12:03:50, Info [oobeldr.exe] UnattendSearchExplicitPath: Found unattend file at [C:\Windows\Panther\Unattend\unattend.xml];
examining for applicability.
2015-04-21 12:03:50, Info [oobeldr.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [oobeSystem]
at [C:\Windows\Panther\Unattend\unattend.xml].
2015-04-21 12:03:50, Info [oobeldr.exe] UnattendSearchExplicitPath: Found unattend file at [C:\Windows\Panther\unattend.xml];
examining for applicability.
2015-04-21 12:03:50, Info [oobeldr.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [oobeSystem]
at [C:\Windows\Panther\unattend.xml].
2015-04-21 12:03:50, Info [oobeldr.exe] Running oobeSystem pass with discovered unattend file [C:\Windows\Panther\Unattend\unattend.xml]...
2015-04-21 12:03:50, Info [oobeldr.exe] Caching copy of unattend file: [C:\Windows\Panther\Unattend\unattend.xml]
-- cached at --> [C:\Windows\panther\unattend.xml]
2015-04-21 12:03:50, Info [oobeldr.exe] Found existing file at [C:\Windows\panther\unattend.xml]; deleting it...
2015-04-21 12:03:50, Info [oobeldr.exe] Cached unattend file, returned: [%windir%\panther\unattend.xml]
2015-04-21 12:03:50, Info [oobeldr.exe] Current pass status for [oobeSystem] is [0x0]
2015-04-21 12:03:50, Info [oobeldr.exe] Applying data-only settings overrides using SMI...
2015-04-21 12:03:51, Info CSI
00000001@2015/4/21:16:03:51.320 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fefbcbf0ad @0x7fefbf69480 @0x7fefbf83ec6 @0x7fefbf55478 @0x7fefbf543c7 @0xff6ba10f)
2015-04-21 12:03:51, Info [oobeldr.exe] Successfully applied data-only settings overrides.
2015-04-21 12:03:51, Info [oobeldr.exe] Calling into RunSMIActionPass to execute unattend GCs for pass [oobeSystem]
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : GenerateActionQueue begin
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Processing pass = oobeSystem
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Generating queue file to C:\Windows\panther\actionqueue\oobeSystem.uaq
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Identity 0: Microsoft-Windows-Shell-Setup, Culture=neutral,
Version=6.1.7601.17514, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Identity 1: Microsoft-Windows-International-Core, Culture=neutral,
Version=6.1.7600.16385, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Using component order file C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\GlobalInstallOrder.xml
2015-04-21 12:03:51, Info CSI
00000001@2015/4/21:16:03:51.398 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fefba0f0ad @0x7fefbff0920 @0x7fefbfef9f0 @0x7fefbfef7f5 @0xff6b9c40 @0xff6b966e)
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Found manifest file C:\Windows\Winsxs\Manifests\amd64_microsoft-windows-international-core_31bf3856ad364e35_6.1.7600.16385_none_459f562ff37206dd.manifest
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Found manifest file C:\Windows\Winsxs\Manifests\amd64_microsoft-windows-shell-setup_31bf3856ad364e35_6.1.7601.17514_none_3080d81b003fb8dd.manifest
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : GenerateActionQueue finish (hr = 0x0)
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : ProcessActionQueue start
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : ProcessActionQueue using queue file C:\Windows\panther\actionqueue\oobeSystem.uaq
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\MUIUNATTEND.EXE / arguments
= / pass = oobeSystem / manifest path = C:\Windows\Winsxs\Manifests\amd64_microsoft-windows-international-core_31bf3856ad364e35_6.1.7600.16385_none_459f562ff37206dd.manifest
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\RUNDLL32.EXE / arguments
= shsetup.dll,SHUnattendedSetup / pass = oobeSystem / manifest path = C:\Windows\Winsxs\Manifests\amd64_microsoft-windows-shell-setup_31bf3856ad364e35_6.1.7601.17514_none_3080d81b003fb8dd.manifest
2015-04-21 12:03:51, Info [oobeldr.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\MUIUNATTEND.EXE"
oobeSystem
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Starting MuiUnattend.exe GC
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] muiunattend is called with pass: oobeSystem
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Unattended setting "UILanguage" could not be found. error:(2).
Ignoring.
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Unattended setting "UILanguageFallback" could not be found.
error:(2). Ignoring.
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Found unattend setting "Systemlocale" with value: "en-US".
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Unattended setting "UserLocale" could not be found. error:(2).
Ignoring.
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Unattended setting "InputLocale" could not be found. error:(2).
Ignoring.
2015-04-21 12:03:51, Info [MUIUNATTEND.EXE] Setting system locale using unattended setting SystemLocale:"en-US".
2015-04-21 12:03:52, Info [MUIUNATTEND.EXE] Set system locale to "en-US" successfully.
2015-04-21 12:03:52, Info [MUIUNATTEND.EXE] Setting OOBE handshake information succeeded.
2015-04-21 12:03:52, Info [MUIUNATTEND.EXE] Exiting MuiUnattend.exe GC
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : process exit code = 0
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : Unattend action returned operation complete.
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\RUNDLL32.EXE"
shsetup.dll,SHUnattendedSetup oobeSystem
2015-04-21 12:03:52, Info [Shell Unattend] Running 'oobeSystem' pass
2015-04-21 12:03:52, Info [Shell Unattend] TimeZone: Time zone set to 'Eastern Standard Time'
2015-04-21 12:03:52, Info [Shell Unattend] Decoded password
2015-04-21 12:03:52, Info [Shell Unattend] UserAccounts: Password set for 'robert.builder'
2015-04-21 12:03:52, Info [Shell Unattend] Exiting 'oobeSystem' pass with status 0x00000000
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : process exit code = 0
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : Unattend action returned operation complete.
2015-04-21 12:03:52, Info [oobeldr.exe] [Action Queue] : ProcessActionQueue finish (hr = 0x0)
2015-04-21 12:03:52, Info [oobeldr.exe] Successfully completed execution of GC queue
2015-04-21 12:03:52, Info [oobeldr.exe] Flushing registry to disk...
2015-04-21 12:03:52, Info [oobeldr.exe] Flush took 234 ms.
2015-04-21 12:03:52, Info [oobeldr.exe] Successfully completed RunSMIPass for oobeSystem.
2015-04-21 12:03:52, Info [oobeldr.exe] No reboot has been requested for oobeSystem unattend.
2015-04-21 12:03:52, Info [oobeldr.exe] Successfully ran oobeSystem pass.
2015-04-21 12:03:52, Info [oobeldr.exe] Launching [C:\Windows\system32\oobe\msoobe.exe]...
2015-04-21 12:03:52, Info [msoobe.exe] Starting service sppsvc
2015-04-21 12:03:55, Info [msoobe.exe] Service sppsvc reports as running
2015-04-21 12:03:55, Info [msoobe.exe] Starting service audiosrv
2015-04-21 12:03:56, Info [msoobe.exe] Service audiosrv reports as running
2015-04-21 12:03:56, Info [msoobe.exe] Successfully created first boot reg key
2015-04-21 12:03:56, Info [msoobe.exe] Display mode is set to 1366x768x32 [60Hz]
2015-04-21 12:03:56, Info [msoobe.exe] Starting service Themes
2015-04-21 12:03:57, Info [msoobe.exe] Service Themes reports as running
2015-04-21 12:03:57, Info [msoobe.exe] Starting service TabletInputService
2015-04-21 12:03:58, Warning [msoobe.exe] Service TabletInputService is not running after waiting 10000 milliseconds
2015-04-21 12:03:59, Info [msoobe.exe] Found [1] UI languages
2015-04-21 12:03:59, Info [msoobe.exe] Saving language [0x0409] [en]
2015-04-21 12:03:59, Info [msoobe.exe] Saving language [0x0409] [en]
2015-04-21 12:03:59, Info [msoobe.exe] Creating background bitmap [layout=0x00000000, cached=1]
2015-04-21 12:03:59, Info [msoobe.exe] PID EditionID: []
2015-04-21 12:03:59, Info [msoobe.exe] Registry EditionID: [Enterprise]
2015-04-21 12:03:59, Info [msoobe.exe] Searching for EULA: [system32\en-US\Licenses\OEM\Enterprise\license.rtf]
2015-04-21 12:03:59, Info [msoobe.exe] Found EULA: [C:\Windows\system32\en-US\Licenses\OEM\Enterprise\license.rtf]
2015-04-21 12:03:59, Info [msoobe.exe] Queuing background work to worker thread; eType=0
2015-04-21 12:03:59, Info [msoobe.exe] Starting service Schedule
2015-04-21 12:03:59, Info [msoobe.exe] Starting service wlansvc
2015-04-21 12:03:59, Info [msoobe.exe] Checking whether to show wireless join
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState : wireless not valid
2015-04-21 12:03:59, Info [msoobe.exe] Networks present [1]
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState : ethernet adapter selected
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState is invalid : Loaded unattend settings
2015-04-21 12:03:59, Info [msoobe.exe] HomeGroup join: network is not NETWORK_HOME
2015-04-21 12:03:59, Info [msoobe.exe] HomeGroup join: skipping HomeGroup join page
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState : wireless not valid
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState : ethernet adapter selected
2015-04-21 12:03:59, Info [msoobe.exe] CFSMNetworkState is invalid : Loaded unattend settings
2015-04-21 12:03:59, Info [msoobe.exe] HomeGroup join: network is not NETWORK_HOME
2015-04-21 12:03:59, Info [msoobe.exe] HomeGroup join: skipping HomeGroup join page
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: entered
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting windows error reporting [0x2]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting Device Metadata PreventDeviceMetadataFromNetwork [0x0]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting Windows Defender DisableTakingAction [0x0]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: enabling Windows Defender check for signatures before scan [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: driver searching value set to [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting Internet Explorer phishing filter [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: enabling SpyNet reporting [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting TroubleShooting DefaultQueryRemoteServer [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting Assitance GlobalOnlineAssist and GlobalImplicitFeedback
[0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting SQMClient CEIPEnable [0x1]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: enabling automatic updates
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: WU setting non admin elevated
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: WU setting non admin elevated set successfully
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting automatic update setting - notification level = aunlScheduledInstallation
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: automatic update settings failed to set information [hr=0x80240037]
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: leaving automatic update settings
2015-04-21 12:03:59, Info [msoobe.exe] Finalize: setting networks
2015-04-21 12:03:59, Info [msoobe.exe] _WaitOnAdapter : Starting on adapter {00000000-0000-0000-0000-000000000000}
2015-04-21 12:04:00, Info [msoobe.exe] Service Schedule reports as running
2015-04-21 12:04:00, Info [msoobe.exe] Successfully verified and committed UI language settings
2015-04-21 12:04:01, Info [msoobe.exe] _WaitOnAdapter : Our network profile could not be found or has not been created
[0x80070490]. Waiting...
2015-04-21 12:04:01, Info [msoobe.exe] OnNetworkAdded : {B6608D81-98A0-4D4B-BA55-094E906187DF}
2015-04-21 12:04:01, Info [msoobe.exe] OnNetworkConnected : {B6608D81-98A0-4D4B-BA55-094E906187DF}
2015-04-21 12:04:02, Info [msoobe.exe] Service wlansvc reports as running
2015-04-21 12:04:02, Info [msoobe.exe] Starting service netprofm
2015-04-21 12:04:02, Info [msoobe.exe] Service netprofm is already running
2015-04-21 12:04:02, Info [msoobe.exe] Successfully signalled event to start up services
2015-04-21 12:04:02, Info [msoobe.exe] OnNetworkPropertyChange : {B6608D81-98A0-4D4B-BA55-094E906187DF} <--- flags
= 0x20
2015-04-21 12:04:02, Info [msoobe.exe] OnNetworkPropertyChange : state = 0
2015-04-21 12:04:06, Info [msoobe.exe] OnNetworkPropertyChange : {B6608D81-98A0-4D4B-BA55-094E906187DF} <--- flags
= 0x20
2015-04-21 12:04:06, Info [msoobe.exe] OnNetworkPropertyChange : state = 0
2015-04-21 12:04:12, Info [msoobe.exe] Successfully notified UI language change
2015-04-21 12:04:31, Info [msoobe.exe] _WaitOnAdapter : Timed out waiting for network to initialize for adapter {00000000-0000-0000-0000-000000000000}
2015-04-21 12:04:31, Info [msoobe.exe] Wait for network init: Couldn't initialize network over wired [hr=0x80004005]
2015-04-21 12:04:31, Info [msoobe.exe] Wait for network init: Completed with hr=0x80004005
2015-04-21 12:04:31, Info [msoobe.exe] Setting networks: No network guid specified or WaitForNetworkInitialize failed
2015-04-21 12:04:31, Info [msoobe.exe] Setting networks: Completed with hr=0x80004005
2015-04-21 12:04:31, Info [msoobe.exe] Running mandatory tasks
2015-04-21 12:04:31, Info [msoobe.exe] Doing background work directly in MandatoryTasks; eType=1
2015-04-21 12:04:32, Error [msoobe.exe] Failed to install product key [hr=0xC004F050]
2015-04-21 12:04:32, Info [msoobe.exe] Starting service wlansvc
2015-04-21 12:04:32, Info [msoobe.exe] Service wlansvc is already running
2015-04-21 12:04:32, Info [msoobe.exe] Starting service netprofm
2015-04-21 12:04:32, Info [msoobe.exe] Service netprofm is already running
2015-04-21 12:04:32, Info [msoobe.exe] Failed to open event to start up services [0x80070002]
2015-04-21 12:04:32, Info [msoobe.exe] Doing background work directly in MandatoryTasks; eType=0
2015-04-21 12:04:32, Info [msoobe.exe] Starting service Schedule
2015-04-21 12:04:32, Info [msoobe.exe] Service Schedule is already running
2015-04-21 12:04:32, Info [msoobe.exe] Successfully verified and committed UI language settings
2015-04-21 12:04:32, Info [msoobe.exe] Successfully notified UI language change
2015-04-21 12:04:33, Info [msoobe.exe] Successfully installed Windows Recovery Environment
2015-04-21 12:04:44, Info [msoobe.exe] Successfully removed administrator profile
2015-04-21 12:04:44, Info [msoobe.exe] RunUserProvidedScript: Found script at [C:\Windows\Setup\Scripts\SetupComplete.cmd];
executing with UI hidden...
2015-04-21 12:07:03, Info [msoobe.exe] RunUserProvidedScript: Successfully executed script; (returned with exit code
0x0)
2015-04-21 12:07:03, Info [msoobe.exe] Exiting mandatory tasks... [0x00000000]
2015-04-21 12:07:03, Info [msoobe.exe] Cleaning up background work
2015-04-21 12:07:03, Info [oobeldr.exe] OrchestrateUpdateImageState: Updating image state from [IMAGE_STATE_UNDEPLOYABLE]
--> [IMAGE_STATE_COMPLETE]
2015-04-21 12:07:03, Info [oobeldr.exe] OOBELdr.exe exiting with code [0x0]...
2015-04-21 12:07:03, Info [windeploy.exe] Process exited with exit code [0x0]
2015-04-21 12:07:03, Info [0x090008] PANTHR CBlackboard::Open: C:\Windows\Panther\SetupInfo succeeded.
2015-04-21 12:07:03, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.
2015-04-21 12:07:03, Info [windeploy.exe] WinDeploy.exe exiting with code [0x0]
2015-04-21 12:22:52, Info [SETUPSQM.EXE] SetupSQM started
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Panther path is C:\Windows\Panther
2015-04-21 12:22:52, Info [SETUPSQM.EXE] SQM is Opted in
2015-04-21 12:22:52, Info [SETUPSQM.EXE] SQM Logger is ready
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Writing SQM data from setup timers to Global Session
2015-04-21 12:22:52, Info [SETUPSQM.EXE] SQMing setup timers
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6366 with data 2340
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6367 with data 0
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6368 with data 402024
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6369 with data 3728
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6370 with data 115143
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6371 with data 967
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6372 with data 1902
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6373 with data 139495
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 6417 with data 191037
2015-04-21 12:22:52, Info [0x090008] PANTHR CBlackboard::Open: C:\Windows\Panther\SetupInfo succeeded.
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Writing SQM data from blackboard to Global Session
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Looking at key Diagnostics\DWORD\BootFirmwareType
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 2837
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Wrote DWORD 1 with WinSqmSetDWORD
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Looking at key Diagnostics\DWORD\Install
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Looking at key Diagnostics\DWORD\Install\StartupPhase
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 846
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Wrote DWORD 4 with WinSqmSetDWORD
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Looking at key Diagnostics\DWORD\BootType
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Found data ID 5810
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Wrote DWORD 0 with WinSqmSetDWORD
2015-04-21 12:22:52, Info [SETUPSQM.EXE] WriteBBValuesToSQM could not open key Diagnostics\DWORDSTREAM\*
2015-04-21 12:22:52, Info [SETUPSQM.EXE] WriteBBValuesToSQM could not open key Diagnostics\STRING\*
2015-04-21 12:22:52, Info [SETUPSQM.EXE] WriteBBValuesToSQM could not open key Diagnostics\STRINGSTREAM\*
2015-04-21 12:22:52, Info [SETUPSQM.EXE] Deleting Setup SQM task
2015-04-21 12:22:52, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.
2015-04-21 12:22:52, Info [SETUPSQM.EXE] SetupSQM is finished