SCCM Client install Issues - while trying install on test client

I have reinstalled SCCM from scratch 3 times, followed all the instructions exactly, and cannot get client to push or install manually.  Below is the last log entry from the client machine.  Help

<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{82DDBE1C-5A45-4456-BB02-7599BEAED91F}</ID><SourceID></SourceID><SourceHost>JMCCLAIN-PC</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:JMCCLAIN-PC:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.montezumacounty.local</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-08-20T14:22:52Z</SentTime><Body Type="ByteRange" Offset="0" Length="1168"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="08:22:52.370+360" date="08-20-2015" component="ccmsetup" context="" type="0" thread="4092" file="siteinfo.cpp:185">
<![LOG[CCM_POST 'HTTP://SCCM.montezumacounty.local/ccm_system/request']LOG]!><time="08:22:52.370+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="httphelper.cpp:806">
<![LOG[Failed to receive ccm message response. Status code = 401]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="2" thread="4092" file="httphelper.cpp:1692">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="siteinfo.cpp:558">
<![LOG[Failed to get DP locations as the expected version from MP 'SCCM.montezumacounty.local'. Error 0x80004005]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="2" thread="4092" file="ccmsetup.cpp:11205">
<![LOG[Failed to find DP locations from MP 'SCCM.montezumacounty.local' with error 0x80004005, status code 401. Check next MP.]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="2" thread="4092" file="ccmsetup.cpp:11056">
<![LOG[Only one MP SCCM.montezumacounty.local is specified. Use it.]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="ccmsetup.cpp:10043">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="ccmsetup.cpp:11085">
<![LOG[GET 'HTTP://SCCM.montezumacounty.local/CCM_Client/ccmsetup.cab']LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="httphelper.cpp:806">
<![LOG[Got 401 challenge Retrying with Windows Auth...]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="httphelper.cpp:1287">
<![LOG[GET 'HTTP://SCCM.montezumacounty.local/CCM_Client/ccmsetup.cab']LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="httphelper.cpp:806">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="state.h:69">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="httphelper.cpp:1080">
<![LOG[Failed to get client version for sending state messages. Error 0x8004100e]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="2" thread="4092" file="state.cpp:178">
<![LOG[Params to send '5.0.8239.1001 Deployment Error 0x80004005. Url HTTP://SCCM.montezumacounty.local/CCM_Client/ccmsetup.cab']LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="0" thread="4092" file="state.cpp:215">
<![LOG[Sending Fallback Status Point message to 'SCCM.MONTEZUMACOUNTY.LOCAL', STATEID='308'.]LOG]!><time="08:22:52.385+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="state.cpp:284">
<![LOG[<ClientDeploymentMessage ErrorCode="0"><Client Baseline="1" Platform="2"/></ClientDeploymentMessage>]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="4092" file="statedetails.cpp:108">
<![LOG[Request failed: 401 Unauthorized
]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="FSPStateMessage" context="" type="3" thread="4092" file="fsputillib.cpp:1347">
<![LOG[Failed to send message to FSP. Error 0x80004005]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="state.cpp:327">
<![LOG[Failed to send status 308. Error (80004005)]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="4092" file="state.cpp:242">
<![LOG['Configuration Manager Client Retry Task' is scheduled to run at 08/20/2015 01:22:52 PM (local) 08/20/2015 07:22:52 PM (UTC) time with arguments ' /config:MobileClient.tcf /RetryWinTask:1'.]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="2660" file="wintask.cpp:327">
<![LOG[ITaskService::GetFolder failed with 0x80070003]LOG]!><time="08:22:52.401+360" date="08-20-2015" component="ccmsetup" context="" type="3" thread="2660" file="wintask.cpp:636">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="08:22:52.448+360" date="08-20-2015" component="ccmsetup" context="" type="1" thread="2660" file="ccmsetup.cpp:10802">

August 20th, 2015 11:45am

Failed to receive ccm message response. Status code = 401

401 Unauthorized

The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.47) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity might include relevant diagnostic information. HTTP access authentication is explained in "HTTP Authentication: Basic and Digest Access Authentication" [43].

I would look at the MP and IIS log C:\inetpub\logs\LogFiles\W3SVC1

It look like the client can`t talk to the MP (SCCM.montezumacounty.loca) to get the DP location to be able to download the files


Free Windows Admin Tool Kit Click here and download it now
August 20th, 2015 11:49am

Failed to receive ccm message response. Status code = 401

401 Unauthorized

The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.47) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity might include relevant diagnostic information. HTTP access authentication is explained in "HTTP Authentication: Basic and Digest Access Authentication" [43].

I would look at the MP and IIS log C:\inetpub\logs\LogFiles\W3SVC1

It look like the client can`t talk to the MP (SCCM.montezumacounty.loca) to get the DP location to be able to download the files


August 20th, 2015 3:48pm

Failed to receive ccm message response. Status code = 401

401 Unauthorized

The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.47) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity might include relevant diagnostic information. HTTP access authentication is explained in "HTTP Authentication: Basic and Digest Access Authentication" [43].

I would look at the MP and IIS log C:\inetpub\logs\LogFiles\W3SVC1

It look like the client can`t talk to the MP (SCCM.montezumacounty.loca) to get the DP location to be able to download the files


Free Windows Admin Tool Kit Click here and download it now
August 20th, 2015 3:48pm

I will reply to this after I reinstall SCCM from scratch,  I am thinking I missed something.  
August 25th, 2015 10:14am

Hi,

Any update?

Free Windows Admin Tool Kit Click here and download it now
September 4th, 2015 7:51am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics