SCCM 2012 - OSD Task Sequence Error 0x80091007

When deploying the OSD to a laptop model the TS is failing, see below from Status Message Viewer:

The task sequence execution engine failed executing the action (Apply E6220 Driver Package) in the group (PostInstall) with the error code 2148077575
Action output: urce, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3217)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3122)
TS::Utility::ResolveSource( pszPackageId, sSource ), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,472)
pDriverInstaller->InstallDriverPackage( sPackageId, pBootCriticalInfo ), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,380)
Exiting with return code 0x80091007
Hash could not be matched for the downloded content. Original ContentHash = EB2A940227C7043DDDCE0985EB37CBB650245F47F12ACD48C936521F5CECAFED, Downloaded ContentHash = 6F4ED0BD9ECC46712E6160BF681ED3785097D95A43652424FB97E12EB1EAF8E3
Failed to determine the driver source location. Code 0x80091007
Failed to provision driver. Code 0x80091007. The operating system reported error 2148077575: The hash value is not correct. 

I have redistributed the Driver packages to the DP's but still no luck - does anyone have any idea's?

Thanks

May 1st, 2013 3:56pm

Hi,

Thank you for your response - I have validated and redistributed the Driver Package to the DP's. Still the same error!

May 2nd, 2013 11:54am

When you deploy your TS have you chosen to "Access content directly from a distribution point when needed by the running task sequence" ? Id give that a go.
Free Windows Admin Tool Kit Click here and download it now
May 2nd, 2013 12:20pm

Hi

The TS deployment options (in SCCM2012) is currently set to "Download content locally when needed by running task sequence".

The strange issue is that we have 4 laptop models, 3 of which deploy successfully, 1 model fails (with the error on original post).

Thanks

May 2nd, 2013 1:23pm

I would suggest that you either remove and re-distribute the content, or create the package again. I did save a webpage that I used when I had the issue, for me updating the DP worked.

Link: http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Systems_Management_Server/Q_25117354.html

Free Windows Admin Tool Kit Click here and download it now
May 2nd, 2013 2:38pm

Thank you - I have removed the content from the DP's and redistributed. I'm currently testing the TS again now, I'll let you know!
May 2nd, 2013 3:05pm

Failed again - next step is to delete the driver package and re-create!
Free Windows Admin Tool Kit Click here and download it now
May 2nd, 2013 3:14pm

good luck ! I hope it works
May 2nd, 2013 3:33pm

Did you manage to resolve this?
Free Windows Admin Tool Kit Click here and download it now
May 3rd, 2013 10:10am

Hi,

Nope, haven't tried removing the Driver package and re-installing as yet! Hopefully I will get a chance in the next few days to test.

I'll let you know the outcome!

Cheers for all your help!

May 7th, 2013 9:45am

Do you still have access to all of the comments from your experts-exchange post? I'm unable to access the comments on your resolution, im intrigued to to a look before removing the driver package and re-creating?

Thanks

Free Windows Admin Tool Kit Click here and download it now
May 8th, 2013 12:32pm

I dont, it wasnt my post, I simply used it to help with my issue at the time.
May 8th, 2013 12:35pm

Below is the whole thread from Expert-sex-change.com: 

SCCM OS deployment error (0x80091007)

Asked by: MoritzCSA

We are getting Error on one of your Primary Child site when deploying a XP Install Package.

In the Advertisment Status we are getting following errors:

The task sequence execution engine failed executing the action

(Apply Operating System Image) in the group () with the error code

2148077575

Action output: zSource, sSourceDirectory, dwFlags, hUserToken,

pszUserName, pszUserPassword), HRESULT=80091007

(e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3130)

ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0),

HRESULT=80091007

(e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3031)

TS::Utility::ResolveSource( this->packageID, this->packagePath,

TS::Utility::ResolveSourceFlags::PersistContents ),

HRESULT=80091007

(e:\nts_sms_fre\sms\client\osdeployment\applyos\installscripted.cpp,

160)

installer.install(), HRESULT=80091007

(e:\nts_sms_fre\sms\client\osdeployment\applyos\installscripted.cpp,

632)

Entering ReleaseSource() for

C:\_SMSTaskSequence\Packages\GID00004

The user tries to

release a source directory

C:\_SMSTaskSequence\Packages\GID00004 that is either already

released or we have not connected to it InstallScripted(

g_InstallPackageID, g_ImageIndex, targetVolume,

g_ConfigPackageID, g_ConfigFileName ), HRESULT=80091007

(e:\nts_sms_fre\sms\client\osdeployment\applyos\applyos.cpp,397).

The operating system reported error 2148077575: The hash value is

not correct.

The task sequence execution engine aborted execution for a failure

of the action (Apply Operating System Image) in the group (). The

operating system reported error 2148077575: The hash value is not

correct.

The task sequence execution engine failed execution of a task

sequence. The operating system reported error 2148077575: The

hash value is not correct.

The task sequence manager could not successfully complete

execution of the task sequence. A failure exit code of 16389 was

returned.

appreciate any help

IMAG0020.jpg

747 KBscreenshot off error on Client Computer when deploying OS

2010-02-05 at 04:39:43ID: 25117354TopicsMS System Center ,Deployment Software for DevelopmentParticipating Experts3Points0Comments9

Request Attention

Answers

EXPERT COMMENT

by: NJComputerNetworksPosted on 2010-02-05 at 05:29:05ID: 26494779

1) enable f8 boot console on your boot image:  http://www.windows-noob.com/forums/index.php?/topic/546-how-can-i-troubleshoot-windows-pe-booting-in-sccm/  this will get you to a command prompt on the client

2) look at the smsts.log for exactly why your client is failing osd:  http://blogs.technet.com/inside_osd/archive/2007/12/13/troubleshooting-tips.aspx

3) also look at the reports for information as to why your OSD is failing:  http://blogs.technet.com/inside_osd/archive/2007/12/13/troubleshooting-tips.aspx

AUTHOR COMMENT

by: MoritzCSAPosted on 2010-02-05 at 05:39:33ID: 26494871

Hi,

Its not the Boot image what has problems. Its one single OS package as others workjust fine

EXPERT COMMENT

by: NJComputerNetworksPosted on 2010-02-05 at 06:01:11ID: 26495086

lol... ok... but enabling F8 will allow you to get to the smsts.log which should contain some more information about why the single OS package is failing.

EXPERT COMMENT

by: JonLambertPosted on 2010-02-08 at 01:43:35ID: 26512090

OK, it looks like (as descripted in the logs) that the Hash Value for the package GID00004 is not correct.

I've seen this before with Boot WIMS, if GID00004 is a boot WIM package, then try creating a new Boot Wim, deploying it to the relevant DPs, assigning it to th TS and try again.

If GID00004 is not a Boot WIM, then try updating the package, and keep an eye on DistMgr.log to ensure it get's distributed Ok.

AUTHOR COMMENT

by: MoritzCSAPosted on 2010-02-09 at 07:13:55ID: 26524885

Hi have recreated the OS Install Packlage and have distributed it again to the Primary Child site. Still the same issue as for example the same OS in English is running fine. GID00004 was an OS Install Package.

I have the log file from the F8 boot atached

smsts-20100210-001651.log

976 KBlog

smsts.log

391 KBlog2

ADMINISTRATIVE COMMENT

by: TheLearnedOnePosted on 2010-03-03 at 18:54:29ID: 27299334

MoritzCSA,

After 21 days without comment, it is time for you to finalize this old question -- accept an answer, split points, or get a refund.  Please be a responsible EE Member and maintain your open questions! Click here to see your options: http://www.experts-exchange.com/help.jsp#hi331

EXPERTS,

I need your help.  Please post your closing recommendations within a few days.  If you do not respond, I may need to assume that no correct answer was provided.

TheLearnedOne

Experts-Exchange Cleanup Volunteer

EXPERT COMMENT

by: JonLambertPosted on 2010-03-03 at 19:17:39ID: 27299526

OK, now the package with an hash error is GID0002A .. which is the OS Install Package, Check the source directory for files with odd characters, or extremely long directory paths .. this can sometime cause a hash-check mismatch.

Hash could not be matched for the downloded content. Original ContentHash = A9173DC49D149170C0F7F5526154AC4381ED0DC0, Downloaded ContentHash = 88601C0BA124401EA13790D2F318AF04CB283DD1      ApplyOperatingSystem      9/02/2010 3:29:21 PM      1680 (0x0690)

ACCEPTED SOLUTION

by: MoritzCSAPosted on 2010-03-04 at 00:23:07ID: 27300766

I have change the OS installation to not download the package. After this change it works fine without issues.

0

excellent

Save to Personal Knowledgebase

EXPERT COMMENT

by: DSS-RMPosted on 2010-10-17 at 07:14:56ID: 33923836

Update the distribution points of the package that was failing. I have had this same problem and a distribution point update will fix it.

Free Windows Admin Tool Kit Click here and download it now
July 5th, 2013 1:46pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics