Hello, How to reconfigure the SCCM 2007 Primary site server without disturbing its secondary site servers. Please let me know the best practices to achive this above requirement.

What do you want to configure exactly?Torsten Meringer | http://www.mssccmfaq.de

What do you mean by "reconfigure"?John Marcum | http://myitforum.com/cs2/blogs/jmarcum/|

Hi, My SCCM Primary Site Server is not working, Admin Console is not opening, So i decided to Reinstall the SCCM Primary Site Server on Different Hardware. I am having 15 Primary Site Server and 25 Secondary Site Server. Under this problematice Primary Site Server i am having 6 Secondary Site Servers. I dont want to reinstall the Secondary Site Server. Please let me know is there any way to reconfigure the SCCM 2007 Primary site server without disturbing its secondary site servers.

Define "Reinstall"? Did you do a restore of the orginial primary or just create a brand new primary? If you created a brand new primary, then you are stuck -- there is no way to "move" the secondaries to this new primary. Reinstalling the entire primary site to solve a console issue is a bit drastic btw. Also, "reconfigure" does not describe your scenario: reinstall != reconfigure. Jason | http://blog.configmgrftw.com | Twitter @JasonSandys

I think where Jason is heading with this is.... When you move SCCM to new hardware you have to do so in a particular way. This should help you; https://skydrive.live.com/#!/view.aspx?cid=6A8D30F2BC0666D0&resid=6A8D30F2BC0666D0%21209 John Marcum | http://myitforum.com/cs2/blogs/jmarcum/|

Hi, Whether its possible to restore the Original Primary to New Hardware. Whether After restoring the Original Primary the Console issue will solve. If yes please let me know the procedure.

As long as you have an SCCM backup (created from the built-in maintenance task) then you are fine. If you don't have that you are going to have to reinstall everything (all servers & clients) John Marcum | http://myitforum.com/cs2/blogs/jmarcum/|