OSD issue on PXE-T04 and PXE-E36 errors
Hi All, I hope some hasseen this problem before and can let me what to check. I am doing some testing on SCCM 2007 and installed SCCM 2007 SP1 on Windows 2008 with DC, DHCP and DNS, all on a vpc 2007. Trying to do a PXE boot on a vpc 2007 client, after it gets IP address, it says: PXE-T04: Access violation PXE-E36: Error received from TFTP server. No errors in smspxe.log. Any suggestions? Thanks for the help!
April 10th, 2008 11:26am

same error here! any suggestions would be appreciated!!
Free Windows Admin Tool Kit Click here and download it now
April 30th, 2008 3:32pm

I'm also running into this issue. I just recently upgraded a Server 2003 SCCM primary site to Server 2008 and the OSD functionality has stopped working. When I PXE boot I receive the following: Code Snippet TFTP. PXE-T04: Access Violation PXE-E36: Error received from TFTP Server. PXE-M0F: Exiting Intel Boot Agent. If I use a Boot disk to try and connect I receive the following: Code Snippet Failed to Run Task Sequence An error occurred while retrieving policy for this computer (0x80004005) For more information...etc., etc. I have uninstalled the SCCM PXE module, then uninstalled WDS, rebooted reinstalled WDS, configured it, verified that it works, installed the SCCM PXE role, and moved the boot images to the PXEDistribution point. What I have found is this: When WDS is installed but not SCCM PXE, then my computer connects to WDS fine, but has no boot image to use. When PXE role is installed but boot images are not pushed to the dist point, then it complains that there is no boot image. When I push the boot images out, THEN it gets the Access Violation errors. I thought it was an ACL issue, so I checked the permissions on the foler. WDS creates a share called RemoteInstall and the SCCM PXE role creates ashare in that directore called SMSPXEBOOT$. When I tried to open that folder I was told that I didn't have permission (I was signed on as a Domain Admin) so I played with the permissions and finally gave the "everyone" group "Read/Execute" permissions from the RemoteInstall directory down. That still had no effect. Anyone have any other ideas?
September 17th, 2008 10:40pm

I got my PXE to work, finally. I had forgotten about NOT configuring the WDS before installing the PXE role on the SCCM server. Here is the list of actions to be taken (Thanks destr0yr_) 1. Remove the SMS PXE role. Look at the PXESetup.log file to verify that the uninstall is complete and successful.2. Uninstall the WDS server.3. Reboot the machine.4. Re-install the WDS server, but do not configure it. Do nothing at all other than installing WDS.5. Add the SMS PXE role. Look at the PXESetup.log file to verify that the installation is complete and successful.6. Add the boot images to the SMS PXE DP share. Look at the distmgr.log file to verify that the replication of the boot image to the DP is complete and successful.7. Try booting a PXE client. Hope this helps someone else.
Free Windows Admin Tool Kit Click here and download it now
September 17th, 2008 11:27pm

Thanks for sharing... I just want to let you know I had to do the exact opposite on a few customer systems to get it working... that is actually configure WDS first, and then install the PSP Role... In fact I always get it to work when pre-configuring WDS first I recommend the following steps... 1. Install WDS, configure it and add a WinPE 2.1 boot image... 2. Verify that it works (DHCP config, VLAN IP helpers etc.) 3. Then remove the boot image, and install the PSP Role. This way you don't have to troubleshoot everything at one time...
September 17th, 2008 11:54pm

hello i think this artical is helpful for me. plz tell me how to add sms pxe role
Free Windows Admin Tool Kit Click here and download it now
September 20th, 2009 1:54pm

here you gomy SCCM step by step Guides > http://www.windows-noob.com/forums/index.php?showtopic=1064
September 20th, 2009 5:36pm

Had the exact same problem. I Finally figured out that I needed to change the path (slashes) in DHCP option 067 from \ to /(example: OSchooser\i386\startrom.com to OSchooser/i386/startrom.com). You'll need to restart the dhcp service after making this change. Scott.
Free Windows Admin Tool Kit Click here and download it now
April 19th, 2010 10:24am

may anybody states why these errors appears other than steps of rebuilding everything from scratch... appreciate your assistance
June 16th, 2010 2:55pm

most likely it's permissions issues with server 2008 or even UAC, My step by step SCCM Guides I'm on Twitter > ncbrady
Free Windows Admin Tool Kit Click here and download it now
June 17th, 2010 1:38am

Are this still valid with R2?
June 25th, 2010 1:55am

Do you think wds work different under windows 2008 then it does under windows 2003,. Once you did it this way , did the workstation connected the wds way or the sccm way.
Free Windows Admin Tool Kit Click here and download it now
April 26th, 2011 3:31pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics