Issues with PXE booting

Hello guys I'm having some issues with PXE booting on my DP.

I've installed them on a single server with SCCM installed and using it as a DP.

When I've tried to PXE boot I'm having some issues. Please see the screenshots below:

Here is the PXE log:


Below are my pictures of 066 and 067 
  • Edited by VisTa. _ 19 hours 6 minutes ago
April 28th, 2015 8:37am

Hi,

have you run the

WDSUTIL /Set-Device /Device:<name> /ReferralServer:<ServerName>
command?

From:
Managing Network Boot Programs
https://technet.microsoft.com/en-us/library/cc732351%28v=ws.10%29.aspx

"If you are not using DHCP options 66 and 67, in order to configure a network boot referral, you must prestage the client and you must run WDSUTIL /Set-Device /Device:<name> /ReferralServer:<ServerName> to specify the server that the client should use."

Regards,

Stoyan

Free Windows Admin Tool Kit Click here and download it now
April 28th, 2015 8:56am

Hi,

have you run the

WDSUTIL /Set-Device /Device:<name> /ReferralServer:<ServerName>
command?

From:
Managing Network Boot Programs
https://technet.microsoft.com/en-us/library/cc732351%28v=ws.10%29.aspx

"If you are not using DHCP options 66 and 67, in order to configure a network boot referral, you must prestage the client and you must run WDSUTIL /Set-Device /Device:<name> /ReferralServer:<ServerName> to specify the server that the client should use."

Regards,

Stoyan

Hi Stoyan I have not, as I'm using the DHCP optioins
April 28th, 2015 9:09am

Hi,

it might be a stupid question, but still: Have you checked the UDP ports? 67 (DHCP), 69 (TFTP) and 4011 (PXE) must be opned on the server doing WDS...

Regards,

Stoyan

Free Windows Admin Tool Kit Click here and download it now
April 28th, 2015 9:32am

Double check that both boot images (x86 and x64) are distributed to the PXE-enabled DP.
April 28th, 2015 9:37am

Hi,

it might be a stupid question, but still: Have you checked the UDP ports? 67 (DHCP), 69 (TFTP) and 4011 (PXE) must be opned on the server doing WDS...

Regards,

Stoyan

I have windows firewall disabled and I have opened the ports see below

Double check that both boot images (x86 and x64) are distributed to the PXE-enabled
Free Windows Admin Tool Kit Click here and download it now
April 28th, 2015 1:15pm

... but the screenshot above does show that a boot image is found after restarting WDS. Does \SMSImages contain them?
April 28th, 2015 2:21pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics