An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,

We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.

Now in File Protection Group, we receive error "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".

This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.

We tried,

  1. Deleted entire protection group and recreated ,
  2. Ran consistency job 2 to 3 times.
  3. Ran Synchronize with consistency check.

But every time It failed. Before upgrade it was working fine.

Thanks


  • Edited by p.th Sunday, January 26, 2014 4:24 PM
January 26th, 2014 4:23pm

Hi

You may potential be facing the same issue outlined in the below thread.

http://social.technet.microsoft.com/Forums/en-US/b53b82b1-639b-4561-9ed2-f9749abd84f8/dpm-2012-r2-an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter?forum=dpmfilebackup

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

 


Free Windows Admin Tool Kit Click here and download it now
January 27th, 2014 1:24pm

Hi

You may potential be facing the same issue outlined in the below thread.

http://social.technet.microsoft.com/Forums/en-US/b53b82b1-639b-4561-9ed2-f9749abd84f8/dpm-2012-r2-an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter?forum=dpmfilebackup

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

 


January 27th, 2014 9:20pm

Hi Jacskon,

thanks for reply, But i read your given like before posted in to forums.

they said some "MS Private HostFix" resolved this issue. how can we avail that hotfix.

Free Windows Admin Tool Kit Click here and download it now
January 27th, 2014 10:09pm

Hi,

The current method to receive the private fix is to open a support incident with the Data Protection Manager Team.

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

January 28th, 2014 5:01am

Hi,

Please see below for details to remedy the issue.

Issue 1

A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

**************



Free Windows Admin Tool Kit Click here and download it now
January 28th, 2014 12:59pm

Hi,

Please see below for details to remedy the issue.

Issue 1

A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

**************



January 28th, 2014 12:59pm

Hi,

Please see below for details to remedy the issue.

Issue 1

A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

**************



Free Windows Admin Tool Kit Click here and download it now
January 28th, 2014 12:59pm

Hi,

Please see below for details to remedy the issue.

Issue 1

A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

**************



January 28th, 2014 12:59pm

Hi<o:p></o:p>

I'm getting the same issue after applying UR5 through windows updates and still get same issue on SharePoint backups.  Does anyone know  a private fix still required, and if so, is it free?<o:p></o:p>

Can't submit on this link that specifies fix.<o:p></o:p>

Thanks<o:p></o:p>

http://social.technet.microsoft.com/Forums/en-US/1f783b98-e469-469a-9961-43beabaeaf0f/an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter-is-incorrect?referrer=http://social.technet.microsoft.com/Forums/en-US/1f783b98-e469-469a-9961-43beabaeaf0f/an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter-is-incorrect?forum=dpmfilebackup

Free Windows Admin Tool Kit Click here and download it now
February 14th, 2014 6:19am

Hi

I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057) issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here http://support.microsoft.com/kb/2904687/en-us

 

 

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."




February 20th, 2014 6:59am

Hi

I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057) issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here http://support.microsoft.com/kb/2904687/en-us

 

 

**************

Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."




Free Windows Admin Tool Kit Click here and download it now
February 20th, 2014 2:56pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics