Hello, The environment is as follows There was a SMS hierarchy before Vpro activation.We installed new SCCM server with sp1 and required fixes, and transferred some boundaries to sccm with side-by-side installation. The certificates (both public and internal web server cert), are in place and OOB component is configured aganist them. Here are the errors from logs, Count : 11SMS_AMT_OPERATION_MANAGER9/11/2009 6:51:48 PM5784 (0x1698)UUID : B9E9FB64-CF09-11DD-BBDA-7D1CFAC30023SMS_AMT_OPERATION_MANAGER9/11/2009 6:51:48 PM5784 (0x1698)Found matched hash from hello message with current provision certificate. (Hash: 742C3192E607E424EB4549542BE1BBC53E6174E2)SMS_AMT_OPERATION_MANAGER9/11/2009 6:51:48 PM5784 (0x1698)Warning: AMT device B9E9FB64-CF09-11DD-BBDA-7D1CFAC30023 is a SMS client. Reject hello message to provision.SMS_AMT_OPERATION_MANAGER9/11/2009 6:51:48 PM5784 (0x1698)Waiting for incoming hello message from AMT devices...SMS_AMT_OPERATION_MANAGER9/11/2009 6:51:48 PM5784 (0x1698) I know that this machine is inside the SCCM boundaries as sccm client is installed on it, and in sccm console Client : YesApproved : ApprovedAssigned : YesBlocked : NoClient Type : AdvancedObsolete : NoActive : YesAMT Status : Not ProvisionedAMT Version : 5.0.1 And this is the output of MEINFOWIN Intel(R) MEInfo Win Version: 2.5.0.1032 BIOS Version: 786G1 v01.08 Intel(R) AMT code versions: Flash: 5.0.1 Netstack: 5.0.1 Apps: 5.0.1 Intel(R) AMT: 5.0.1 Sku: 18462 VendorID: 8086 Build Number: 1111 Recovery Version: 5.0.1 Recovery Build Num: 1111 Legacy Mode: False Link status: Link up Cryptography fuse: Enabled Flash protection: Enabled Last reset reason: Power up Setup and Configuration: Not started BIOS Mode: Post Boot Error: The operation failed due to an internal error. FWU Override Counter: Always FWU Override Qualifier: Always FW on Flash Desc Override: Disable Kedron Driver Version: Not Available Kedron HW Version: Not Available UNS Version: 3.0.4.1089 LMS Version: 3.0.10.1089 HECI Version: 5.0.1.1055

i also get this AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 5900 (0x170C) ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) Description: The client cannot connect to the remote host specified in the request. Verify that the service on the remote host is running and is accepting requests. You may use the following command to analyze the state of the WinRM service and to configure the service, if necessary: "winrm quickconfig". SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) session params : https://vprotest.domain.com:16993 , 11001 SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) Description: The client cannot connect to the remote host specified in the request. Verify that the service on the remote host is running and is accepting requests. You may use the following command to analyze the state of the WinRM service and to configure the service, if necessary: "winrm quickconfig". SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) CSMSAMTDiscoveryTask::Execute - DDR written to D:\PROGRAM FILES\SCCM\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:27 AM 2556 (0x09FC) CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.72.38.210:16992. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:28 AM 3348 (0x0D14) CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.72.38.210:16993. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:29 AM 3348 (0x0D14) CSMSAMTDiscoveryTask::Execute - DDR written to D:\PROGRAM FILES\SCCM\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:29 AM 3348 (0x0D14) Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:29 AM 3348 (0x0D14) AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:47 AM 5900 (0x170C) AMT Discovery Worker: Wait 3600 seconds... SMS_AMT_OPERATION_MANAGER 9/14/2009 11:57:47 AM 5900 (0x170C) Auto-worker Thread Pool: Work thread 3348 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:58:09 AM 3348 (0x0D14) Auto-worker Thread Pool: Work thread 3348 exiting. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:58:09 AM 3348 (0x0D14) Auto-worker Thread Pool: Work thread 2556 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:58:09 AM 2556 (0x09FC) Auto-worker Thread Pool: Work thread 2556 exiting. SMS_AMT_OPERATION_MANAGER 9/14/2009 11:58:09 AM 2556 (0x09FC) Auto-worker Thread Pool: Current size of the thread pool is 0 SMS_AMT_OPERATION_MANAGER 9/14/2009 11:58:09 AM 5656 (0x1618)

Hi, for provisioning AMT client, you need to enable auto provisioning on the collection, which AMT client is in. You can open the collection setting to find the checkbox.Configuration Manager China R&D Bloghttp://blogs.technet.com/msdchina/

Yes i have enabled it,But now, for HP 7900 SSF pc's with 5.0.1 firmware i am still having errors like CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.72.38.210:16993. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:52:05 PM 2824 (0x0B08) CSMSAMTDiscoveryTask::Execute - DDR written to D:\PROGRAM FILES\SCCM\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 9/14/2009 3:52:05 PM 2824 (0x0B08) Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:52:05 PM 2824 (0x0B08) CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.72.38.210:16992. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:52:06 PM 5672 (0x1628) CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.72.38.210:16993. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:52:07 PM 5672 (0x1628) and also for HP 7800 SSF client with ME firmware version 3.2.3 i have these errors Waiting for incoming hello message from AMT devices... SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:20 PM 2928 (0x0B70) Incoming Connection from 10.72.38.200:16994. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70) Incoming data is - Configuration version: PKI Configuration. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70) Count : 6 SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70) UUID : 64B47576-215F-11DD-BBDA-294D130D001F SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70) Found matched hash from hello message with current provision certificate. (Hash: 742C3192E607E424EB4549542BE1BBC53E6174E2) SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70) Error: AMT device 64B47576-215F-11DD-BBDA-294D130D001F has not been imported to sms. Can not finish provisioning. SMS_AMT_OPERATION_MANAGER 9/14/2009 3:59:50 PM 2928 (0x0B70)

For the 5.0.1 AMT, the error means the AMT has not been activated yet for provisioning. The provision schedule by default is 24 hours and client agent will try to activate it when the schedule hit. So if you enabled it just now, you probably need to wait 24 hours for it being provisioned.For the 3.2.3 AMT, it's not the SCCM client. If you want that machine to be provisioned(we call it out of band provisioning), you need to import it manually. The action is on the collection node.Configuration Manager China R&D Bloghttp://blogs.technet.com/msdchina/

Thank you for your reply but can you be more specific about what you said as i am a bit confusedCan i manually take an action not to wait for 24 hours? (like astep by step how to )The computer with 3.2.3is an sccm client, and i am trying to do in band prov. What do you mean by importing manually?And here is some more logsThe client is a sccm client, HP 7800 SSF desktop computer, with all the latest drivers and firmwaresComputer Name is BIM160Ip adress is 10.72.38.200 Client : YesApproved : ApprovedAssigned : YesBlocked : NoClient Type : AdvancedObsolete : NoActive : YesAMT Status : UnknownAMT Version : 3.2.3 From amtopmgr.log AMT Discovery Worker: Wakes up to process instruction filesSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Wait 3600 seconds...SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Wakes up to process instruction filesSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Reading Discovery Instruction D:\PROGRAM FILES\SCCM\inboxes\amtopmgr.box\disc\{EC245A30-E399-460E-AAA8-6A22BA8A7DC2}.RDC...SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:82492A59-8E44-4FB2-B10F-5357979DF8CD', 'WSD'SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine BIM160 (bim160.xxx.com), ID: 2579 - 10.72.38.200 from Resource GUID:82492A59-8E44-4FB2-B10F-5357979DF8CD.SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 2579SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Execute query exec AMT_GetProvAccountsSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Finish reading discovery instruction D:\PROGRAM FILES\SCCM\inboxes\amtopmgr.box\disc\{EC245A30-E399-460E-AAA8-6A22BA8A7DC2}.RDCSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Parsed 1 instruction filesSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: There are 1 tasks in pending listSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Send task to completion portSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)Auto-worker Thread Pool: Current size of the thread pool is 1SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCM1 SITE=WSD PID=3964 TID=5900 GMTDATE=Tue Sep 15 07:42:29.314 2009 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Wait 20 seconds...SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Wakes up to process instruction filesSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)AMT Discovery Worker: Wait 20 seconds...SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5900 (0x170C)Auto-worker Thread Pool: Work thread 5256 startedSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:29 AM5256 (0x1488)HTTP digest authentication failed with status = 401.SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:33 AM5256 (0x1488)GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:40 AM5256 (0x1488)CSMSAMTDiscoveryTask::Execute - DDR written to D:\PROGRAM FILES\SCCM\inboxes\auth\ddm.boxSMS_AMT_OPERATION_MANAGER9/15/2009 10:42:40 AM5256 (0x1488)Auto-worker Thread Pool: Succeed to run the task . Remove it from task list.SMS_AMT_OPERATION_MANAGER9/15/2009 10:42:40 AM5256 (0x1488) Incoming Connection from 10.72.38.200:16994.SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:52 AM2928 (0x0B70)Incoming data is - Configuration version: PKI Configuration.SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:52 AM2928 (0x0B70)Count : 24SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:52 AM2928 (0x0B70)UUID : 64B47576-215F-11DD-BBDA-294D130D001FSMS_AMT_OPERATION_MANAGER9/15/2009 9:38:52 AM2928 (0x0B70)Found matched hash from hello message with current provision certificate. (Hash: 742C3192E607E424EB4549542BE1BBC53E6174E2)SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:53 AM2928 (0x0B70)Warning: AMT device 64B47576-215F-11DD-BBDA-294D130D001F is a SMS client. Reject hello message to provision.SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:53 AM2928 (0x0B70)Waiting for incoming hello message from AMT devices...SMS_AMT_OPERATION_MANAGER9/15/2009 9:38:53 AM2928 (0x0B70) From client oobmgmt.log BEGINoobmgmt9/14/2009 4:08:58 PM1992 (0x07C8)Retrying to activate the device.oobmgmt9/14/2009 4:08:58 PM1992 (0x07C8)New OTP generatedoobmgmt9/14/2009 4:08:59 PM1992 (0x07C8)Successfully activated the device.oobmgmt9/14/2009 4:08:59 PM1992 (0x07C8)ENDoobmgmt9/14/2009 4:08:59 PM1992 (0x07C8)ON SCHEDULEOOBMgmt9/14/2009 4:08:59 PM2676 (0x0A74)BEGINoobmgmt9/14/2009 4:08:59 PM2676 (0x0A74)Retrying to activate the device.oobmgmt9/14/2009 4:08:59 PM2676 (0x0A74)Resending last OTPoobmgmt9/14/2009 4:08:59 PM2676 (0x0A74)Successfully activated the device.oobmgmt9/14/2009 4:09:00 PM2676 (0x0A74)ENDoobmgmt9/14/2009 4:09:00 PM2676 (0x0A74) From MeINFOWIN Intel(R) MEInfo Win Version: 2.5.0.1032 BIOS Version: 786F1 v01.28 Intel(R) AMT code versions: Flash: 3.2.3 Netstack: 3.2.3 Apps: 3.2.3 Intel(R) AMT: 3.2.3 Sku: 14 VendorID: 8086 Build Number: 1037 Recovery Version: 3.2.3 Recovery Build Num: 1037 Legacy Mode: False Link status: Link upCryptography fuse: EnabledFlash protection: EnabledLast reset reason: Firmware ResetSetup and Configuration: In processBIOS Mode: Post BootDedicated Mac Address: 00-1f-29-**-**-**Host Mac Address: 00-1f-29-**-**-**FWU Override Counter: AlwaysFWU Override Qualifier: AlwaysFW on Flash Desc Override: DisableKedron Driver Version: Not AvailableKedron HW Version: Not AvailableUNS Version: 3.2.0.1018LMS Version: 3.0.10.1018HECI Version: 3.0.30.1086

Well as far as i guess,i was not patient enough to wait for provisioning schedule, and i was confused with the logs thinking them as errors preventing the clients from provisioningNow i have found a way to reset auto provisioning and my two test machines got provisioned as followsmachine 1 HP 7900 SSF with ME FIRMWARE5.1.10machine 2 HP 7800 SSF with ME FIRMWARE 3.2.3But now i have another problem,when i open out of band management console for both machines, i can see the ip adress for 3.2.3 in status tab, but not for 5.1.10And when browsing for 5.1.10 in system informatin tab, if i click bios element, the application throws exception. The oob management console seems like it does not support 5.1.10And another big problem is, my both machines have serial connection failed and ide redirect as inactive. I know that i have installed SOL drivers on both machine as well as i have onlyselectedPT administration in OOB role configuration in SCCM.Any help on this?

Here is the error from OOBConsole.log inside AdminUI/AdminUILog folder [6][9/15/2009 3:15:42 PM] :System.Management.ManagementException\r\nInvalid parameter \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementPath.SetWbemPath(IWbemPath wbemPath, String path) at System.Management.ManagementPath.CreateWbemPath(String path) at System.Management.ManagementPath..ctor(String path) at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details: [11][9/15/2009 3:15:49 PM] :IMR_SOLOpenTCPSession2 with user = DOMAIN\smsuser fail with result:0x20, description:Failed to Establish TLS Connection [11][9/15/2009 3:15:49 PM] :IMR_SOLOpenTCPSession fail with result:0x00000020. [11][9/15/2009 3:15:51 PM] :IMR_SOLOpenTCPSession2 with user = DOMAIN\smsuser fail with result:0x20, description:Failed to Establish TLS Connection [11][9/15/2009 3:15:51 PM] :IMR_SOLOpenTCPSession fail with result:0x00000020. [11][9/15/2009 3:15:52 PM] :IMR_SOLOpenTCPSession2 with user = DOMAIN\smsuser fail with result:0x20, description:Failed to Establish TLS Connection [11][9/15/2009 3:15:52 PM] :IMR_SOLOpenTCPSession fail with result:0x00000020. [11][9/15/2009 3:15:54 PM] :IMR_SOLOpenTCPSession2 with user = DOMAIN\smsuser fail with result:0x20, description:Failed to Establish TLS Connection [11][9/15/2009 3:15:54 PM] :IMR_SOLOpenTCPSession fail with result:0x00000020. [11][9/15/2009 3:15:56 PM] :IMR_SOLOpenTCPSession2 with user = DOMAIN\smsuser fail with result:0x20, description:Failed to Establish TLS Connection [11][9/15/2009 3:15:56 PM] :IMR_SOLOpenTCPSession fail with result:0x00000020.

Intel firmware has limitation of the kerberos size. You may refer to the article http://communities.intel.com/community/openportit/vproexpert/blog/2009/03/23/kerberos-ticket-size-can-stop-you-from-connecting-to-vpro-systems-and-using-idersoland run the tool to see if it matchs your issue.Configuration Manager China R&D Bloghttp://blogs.technet.com/msdchina/

well thanks for all that repliedthe last problem was, the sub CA cert was missing from the machine where i was running OOB console, then i have placed the related cert into local machine store and now everything works just fine

Hi, I have a problem in provisioning the vpro client using SCCM. The SCCM server is able to recognize the AMT client Status as "Not provisioned" but it was unable to provision it. I tried uninstalling the sccm client agent from the vpro machine and enabled the in-band provisioning settings(" Enable auomatic out of band management provisioning" ) in sccm server and then installed the sccm client agent in the vpro client.still the SCCM server was unable to provision the vpro client . In the amptomgr.log file it thrown up the following error message. Error message 1: "Failed to process hello message from 192.168.2.150:16994" Error message 2: "DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992" Please any one can help me on this. I m using "HP EliteBook 6930p" laptop as a vpro client. Is there any problem related to Port blocking, If it so how can I check this out and even I was unable to browse the vpro client from IE browser but all these setup has been made in a separate lab environment and SCCM, AD/Certificate server are installed in the same machine. Log file: Count : 3 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>UUID : E5CA61B0-150E-11DF-A002-5D0011727E02 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>Found matched hash from hello message with current provision certificate. (Hash: B62182FD84BA7DA099E0A3AA37AF1D4033964F29) $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>Warning: AMT device E5CA61B0-150E-11DF-A002-5D0011727E02 is a SMS client. Reject hello message to provision. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>Error: Failed to process hello message from 192.168.2.150:16994 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>Waiting for incoming hello message from AMT devices... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:50:14.937 2010 Central Standard Time><thread=3720 (0xE88)>Start processing incoming hello message from 192.168.2.150:16994. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.578 2010 Central Standard Time><thread=3720 (0xE88)>Incoming data is - Configuration version: PKI Configuration. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.671 2010 Central Standard Time><thread=3720 (0xE88)>Count : 4 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.671 2010 Central Standard Time><thread=3720 (0xE88)>UUID : E5CA61B0-150E-11DF-A002-5D0011727E02 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.671 2010 Central Standard Time><thread=3720 (0xE88)>Found matched hash from hello message with current provision certificate. (Hash: B62182FD84BA7DA099E0A3AA37AF1D4033964F29) $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.671 2010 Central Standard Time><thread=3720 (0xE88)>Warning: AMT device E5CA61B0-150E-11DF-A002-5D0011727E02 is a SMS client. Reject hello message to provision. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.687 2010 Central Standard Time><thread=3720 (0xE88)>Error: Failed to process hello message from 192.168.2.150:16994 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.687 2010 Central Standard Time><thread=3720 (0xE88)>Waiting for incoming hello message from AMT devices... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:51:38.687 2010 Central Standard Time><thread=3720 (0xE88)>AMT Operation Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:21.125 2010 Central Standard Time><thread=3948 (0xF6C)>AMT Operation Worker: Wait 3600 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:21.125 2010 Central Standard Time><thread=3948 (0xF6C)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.296 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Reading Discovery Instruction d:\sms\inboxes\amtopmgr.box\disc\{38BF1D4C-F458-431F-8949-F8FF7409C277}.RDC...~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.296 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668', 'DL1'~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.296 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine TESTINGIMAGE (testingimage.sccmdl.com), ID: 14 - 192.168.2.150 from Resource GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.296 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 14~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetProvAccounts~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Finish reading discovery instruction d:\sms\inboxes\amtopmgr.box\disc\{38BF1D4C-F458-431F-8949-F8FF7409C277}.RDC~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Parsed 1 instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: There are 1 tasks in pending list $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Send task to completion port $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Current size of the thread pool is 1 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 4072 started $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=4072 (0xFE8)>AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCMPS01 SITE=DL1 PID=2468 TID=3944 GMTDATE=Tue Mar 09 14:52:51.312 2010 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Reading Discovery Instruction d:\sms\inboxes\amtopmgr.box\disc\{AB5C3325-9D4D-4D15-8BF0-F76DE7490D7A}.RDC...~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668', 'DL1'~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine TESTINGIMAGE (testingimage.sccmdl.com), ID: 14 - 192.168.2.150 from Resource GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 14~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetProvAccounts~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Finish reading discovery instruction d:\sms\inboxes\amtopmgr.box\disc\{AB5C3325-9D4D-4D15-8BF0-F76DE7490D7A}.RDC~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Parsed 1 instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: There are 2 tasks in pending list $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.312 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Send task to completion port $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Current size of the thread pool is 2 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 3532 started $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3532 (0xDCC)>AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCMPS01 SITE=DL1 PID=2468 TID=3944 GMTDATE=Tue Mar 09 14:52:51.328 2010 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:51.328 2010 Central Standard Time><thread=3944 (0xF68)>CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:52.218 2010 Central Standard Time><thread=4072 (0xFE8)>CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:52:52.328 2010 Central Standard Time><thread=3532 (0xDCC)>GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:04.718 2010 Central Standard Time><thread=4072 (0xFE8)>CSMSAMTDiscoveryTask::Execute - DDR written to d:\sms\inboxes\auth\ddm.box~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:04.718 2010 Central Standard Time><thread=4072 (0xFE8)>Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:04.734 2010 Central Standard Time><thread=4072 (0xFE8)>GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:06.390 2010 Central Standard Time><thread=3532 (0xDCC)>CSMSAMTDiscoveryTask::Execute - DDR written to d:\sms\inboxes\auth\ddm.box~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:06.390 2010 Central Standard Time><thread=3532 (0xDCC)>Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:06.453 2010 Central Standard Time><thread=3532 (0xDCC)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:11.328 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 3600 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:11.328 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 3532 has been requested to shut down. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:46.453 2010 Central Standard Time><thread=3532 (0xDCC)>Auto-worker Thread Pool: Work thread 3532 exiting. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:46.453 2010 Central Standard Time><thread=3532 (0xDCC)>Auto-worker Thread Pool: Work thread 4072 has been requested to shut down. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:46.453 2010 Central Standard Time><thread=4072 (0xFE8)>Auto-worker Thread Pool: Work thread 4072 exiting. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:46.453 2010 Central Standard Time><thread=4072 (0xFE8)>Auto-worker Thread Pool: Current size of the thread pool is 0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 08:53:46.453 2010 Central Standard Time><thread=3712 (0xE80)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Reading Discovery Instruction d:\sms\inboxes\amtopmgr.box\disc\{73A464A2-35BB-4B5D-87CF-82FC8E0ECE34}.RDC...~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668', 'DL1'~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine TESTINGIMAGE (testingimage.sccmdl.com), ID: 14 - 192.168.2.150 from Resource GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 14~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetProvAccounts~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Finish reading discovery instruction d:\sms\inboxes\amtopmgr.box\disc\{73A464A2-35BB-4B5D-87CF-82FC8E0ECE34}.RDC~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Parsed 1 instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: There are 1 tasks in pending list $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Send task to completion port $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Current size of the thread pool is 1 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 1244 started $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=1244 (0x4DC)>AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.531 2010 Central Standard Time><thread=3944 (0xF68)>STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCMPS01 SITE=DL1 PID=2468 TID=3944 GMTDATE=Tue Mar 09 15:02:10.562 2010 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:10.562 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Reading Discovery Instruction d:\sms\inboxes\amtopmgr.box\disc\{3189D1DD-D203-48E5-A934-678EC4BD170E}.RDC...~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668', 'DL1'~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.515 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine TESTINGIMAGE (testingimage.sccmdl.com), ID: 14 - 192.168.2.150 from Resource GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 14~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetProvAccounts~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Finish reading discovery instruction d:\sms\inboxes\amtopmgr.box\disc\{3189D1DD-D203-48E5-A934-678EC4BD170E}.RDC~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Parsed 1 instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: There are 2 tasks in pending list $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Send task to completion port $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Current size of the thread pool is 2 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 1580 started $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=1580 (0x62C)>AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.531 2010 Central Standard Time><thread=3944 (0xF68)>STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCMPS01 SITE=DL1 PID=2468 TID=3944 GMTDATE=Tue Mar 09 15:02:11.546 2010 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.546 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.546 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.546 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.546 2010 Central Standard Time><thread=3944 (0xF68)>CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:11.593 2010 Central Standard Time><thread=1244 (0x4DC)>CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:12.687 2010 Central Standard Time><thread=1580 (0x62C)>GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:23.671 2010 Central Standard Time><thread=1244 (0x4DC)>CSMSAMTDiscoveryTask::Execute - DDR written to d:\sms\inboxes\auth\ddm.box~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:23.671 2010 Central Standard Time><thread=1244 (0x4DC)>Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:23.703 2010 Central Standard Time><thread=1244 (0x4DC)>GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:25.375 2010 Central Standard Time><thread=1580 (0x62C)>CSMSAMTDiscoveryTask::Execute - DDR written to d:\sms\inboxes\auth\ddm.box~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:25.375 2010 Central Standard Time><thread=1580 (0x62C)>Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:25.390 2010 Central Standard Time><thread=1580 (0x62C)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:31.546 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 3600 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:02:31.546 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 1244 has been requested to shut down. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:05.390 2010 Central Standard Time><thread=1244 (0x4DC)>Auto-worker Thread Pool: Work thread 1244 exiting. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:05.390 2010 Central Standard Time><thread=1244 (0x4DC)>Auto-worker Thread Pool: Work thread 1580 has been requested to shut down. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:05.390 2010 Central Standard Time><thread=1580 (0x62C)>Auto-worker Thread Pool: Work thread 1580 exiting. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:05.390 2010 Central Standard Time><thread=1580 (0x62C)>Auto-worker Thread Pool: Current size of the thread pool is 0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:05.390 2010 Central Standard Time><thread=3712 (0xE80)>Start processing incoming hello message from 192.168.2.150:16994. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.843 2010 Central Standard Time><thread=3720 (0xE88)>Incoming data is - Configuration version: PKI Configuration. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>Count : 5 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>UUID : E5CA61B0-150E-11DF-A002-5D0011727E02 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>Found matched hash from hello message with current provision certificate. (Hash: B62182FD84BA7DA099E0A3AA37AF1D4033964F29) $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>Warning: AMT device E5CA61B0-150E-11DF-A002-5D0011727E02 is a SMS client. Reject hello message to provision. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>Error: Failed to process hello message from 192.168.2.150:16994 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>Waiting for incoming hello message from AMT devices... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:03:19.937 2010 Central Standard Time><thread=3720 (0xE88)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.718 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 3600 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.718 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.734 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Reading Discovery Instruction d:\sms\inboxes\amtopmgr.box\disc\{DDF37E33-9CAD-4D1F-A300-32CC4BF4791A}.RDC...~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.734 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, 'GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668', 'DL1'~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.734 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine TESTINGIMAGE (testingimage.sccmdl.com), ID: 14 - 192.168.2.150 from Resource GUID:A6DC4136-20BA-4A34-965F-8B3C673CA668. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.734 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 14~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Execute query exec AMT_GetProvAccounts~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Finish reading discovery instruction d:\sms\inboxes\amtopmgr.box\disc\{DDF37E33-9CAD-4D1F-A300-32CC4BF4791A}.RDC~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Parsed 1 instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: There are 1 tasks in pending list $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Send task to completion port $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Current size of the thread pool is 1 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 1800 started $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.750 2010 Central Standard Time><thread=1800 (0x708)>AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.765 2010 Central Standard Time><thread=3944 (0xF68)>STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCMPS01 SITE=DL1 PID=2468 TID=3944 GMTDATE=Tue Mar 09 15:05:28.765 2010 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.765 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.765 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.765 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 20 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:28.765 2010 Central Standard Time><thread=3944 (0xF68)>CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 192.168.2.150:16992.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:29.843 2010 Central Standard Time><thread=1800 (0x708)>GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientError = 0.~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:38.203 2010 Central Standard Time><thread=1800 (0x708)>CSMSAMTDiscoveryTask::Execute - DDR written to d:\sms\inboxes\auth\ddm.box~ $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:38.203 2010 Central Standard Time><thread=1800 (0x708)>Auto-worker Thread Pool: Succeed to run the task . Remove it from task list. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:38.218 2010 Central Standard Time><thread=1800 (0x708)>AMT Discovery Worker: Wakes up to process instruction files $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:48.765 2010 Central Standard Time><thread=3944 (0xF68)>AMT Discovery Worker: Wait 3600 seconds... $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:05:48.765 2010 Central Standard Time><thread=3944 (0xF68)>Auto-worker Thread Pool: Work thread 1800 has been requested to shut down. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:06:18.218 2010 Central Standard Time><thread=1800 (0x708)>Auto-worker Thread Pool: Work thread 1800 exiting. $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:06:18.218 2010 Central Standard Time><thread=1800 (0x708)>Auto-worker Thread Pool: Current size of the thread pool is 0 $$<SMS_AMT_OPERATION_MANAGER><Tue Mar 09 09:06:18.218 2010 Central Standard Time><thread=3712 (0xE80)>